Bring the life back to faded plastic and rubber trim! This treatment restores the deep darkness, natural gloss, and rich texture of black trim to revitalize your vehicle. The unique coating liquid penetrates into the surface and polymerizes to form a flexible yet glossy surface, making it suitable for restoring both hard plastic and soft rubber!
| Name of product | Rubber & Plastic Parts Restoration Agent |
|---|---|
| JAN code | 4975759095002 |
| Content | Coating Agent (15mL) x 1bottle Hard Sponge x 2pcs Soft Sponge x 2pcs Silicone off Wipes x 3sheets Gloves x 2pcs |
| Ingredients and materials | Silicon compounds, propyl alcohol |
| Storage and disposal methods | STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING. USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS. |
How to use the product
Note: Apply only to clean, dry, unpainted plastic and rubber.
1. First clean and degrease the area to be treated using the included ‘Silicone Off’ degreasing sheets.
Note: Some textured plastics may pick up fibers from the sheet. Remove these before pr℃eeding. To prevent the sheets from drying out, firmly seal the package between uses.
2. Cut the sponge according to the area to be treated. The black sponge is for hard plastic, the white sponge is for soft rubber. Apply a small amount of the liquid (green label), and spread thinly and evenly across the surface to be treated.
Note: Some rubber parts may absorb the liquid. Keep applying until enough liquid remains.
3. After drying for around 5 minutes, use a fresh sheet to lightly wipe up the surface for an even finish. If left for too long, the excess will not be possible to remove.
Note: Do not touch or wet for 24 hours. Do not reuse sponges that have hardened. If the liquid unintentionally comes into contact with another surface, wipe off immediately.
1. First clean and degrease the area to be treated using the included ‘Silicone Off’ degreasing sheets.
Note: Some textured plastics may pick up fibers from the sheet. Remove these before pr℃eeding. To prevent the sheets from drying out, firmly seal the package between uses.
2. Cut the sponge according to the area to be treated. The black sponge is for hard plastic, the white sponge is for soft rubber. Apply a small amount of the liquid (green label), and spread thinly and evenly across the surface to be treated.
Note: Some rubber parts may absorb the liquid. Keep applying until enough liquid remains.
3. After drying for around 5 minutes, use a fresh sheet to lightly wipe up the surface for an even finish. If left for too long, the excess will not be possible to remove.
Note: Do not touch or wet for 24 hours. Do not reuse sponges that have hardened. If the liquid unintentionally comes into contact with another surface, wipe off immediately.
-
- USE ONLY FOR INTENDED PURPOSE.
DO NOT TOUCH, EXPOSE TO RAIN OR GET WET DURING DRYING.
MAKE SURE PRODUCT DOES NOT TO COME INTO CONTACT WITH CLOTHING, IF THIS OCCURS WASH IMMEDIATELY.
DO NOT USE IN HOT, RAINY OR COLD WEATHER LESS THAN 10°C DEGREES. MAY CAUSE IRREGULARITIES.
WHITENING MAY OCCUR WHERE THERE IS STRONG FRICTION.
LIQUID REACTS WITH AIR, CLOSE CAP IMMEDIATELY AFTER USE. STORE IN A COOL PLACE AWAY FROM SUNLIGHT.
WASH HANDS WELL WITH SOAP AFTER USE.
WASH HANDS WELL WITH SOAP AFTER USE.
DO NOT USE ON PARTS RELATED TO DRIVING AND VISIBILITY, LIKE THE STEERING WHEEL, PEDALS, WIPERS, TIRES. DEPENDING ON THE CONDITION OF THE RUBBER/PLASTIC, RESULTS MAY VARY. DO NOT USE ON CRACKED OR DAMAGED MATERIALS.
- USE ONLY FOR INTENDED PURPOSE.
-
DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.
AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE.
KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.