The clay type patty allows you to repair as if you play with the clay. It can resist heat up to 200℃.
| Name of product | Muffler Clay Putty |
|---|---|
| JAN code | 4975759091912 |
| Content | 17g |
| Ingredients and materials | Main agents: epoxy resins, fillers Curing agent: polyamide, filler |
| Storage and disposal methods | STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING. USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS. |
How to use the product
1. Remove rust or dirt from the area being repaired with sandpaper or a sanding mesh sheet.
2. Cut into the same length of both clay putties, peel off the film and mix them up until they become the same color.
3. Apply it on the area being repaired while pressing. It takes about 8-10 hours to harden.
2. Cut into the same length of both clay putties, peel off the film and mix them up until they become the same color.
3. Apply it on the area being repaired while pressing. It takes about 8-10 hours to harden.
-
- USE ONLY FOR INTENDED PURPOSE.
USE ONLY IN WELL-VENTILATED AREAS.
AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
WASH HANDS WELL WITH SOAP AFTER USE.
DO NOT MIX WITH OTHER PRODUCTS OR MATERIALS.
PUTTY MIXED ONCE CANNOT BE REUSED. MIX ONLY WHAT YOU NEED. DISCARD REMAINING MIXED PRODUCT. DO NOT USE ON ENGINE UNTIL PUTTY IS COMPLETELY CURED. PLEASE USE PROPER EQUIPMENT TO SAFELY JACK CAR UP TO USE THIS PRODUCT.
- USE ONLY FOR INTENDED PURPOSE.
-
DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.
AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.