Repair is complete by filling the dent with your own hands. Cut into the same amount of both epoxy putties, and then mix them.
Name of product | Epoxy Clay Filler |
---|---|
JAN code | 4975759090168 |
Content | Putty:25g Hardener:25g |
Ingredients and materials | Main agents: synthetic resin (30%), filler Curing agent: synthetic resin (26%), filler |
Storage and disposal methods | STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING. USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS. |
How to use the product
1. Remove dust and dirt from the surface. We recommend you use sandpaper to make the putty adhere firmly to the surface.
2. Wear the included gloves and cut into the same amount of the Main agent (yellow) and Hardener (white), and then mix.
3. Fill in the dent or hole with the putty while pressing strongly, then finish up with Waterproof Abrasive Paper and Body Paint (both sold separately).
2. Wear the included gloves and cut into the same amount of the Main agent (yellow) and Hardener (white), and then mix.
3. Fill in the dent or hole with the putty while pressing strongly, then finish up with Waterproof Abrasive Paper and Body Paint (both sold separately).
-
- USE ONLY FOR INTENDED PURPOSE.
USE ONLY IN WELL-VENTILATED AREAS.
WASH HANDS WELL WITH SOAP AFTER USE.
DEPENDING ON THE CONDITION OF THE CAR AND PAINT, RESULTS MAY VARY. RISK OF SCRATCHES/PEELING. IF THE PUTTY IS TOO THICK, IT WILL NOT DRY. APPLY WITH A THICKNESS OF 1MM.
SUITABLE FOR USE BETWEEN 10°C AND 30°C. THIS PUTTY CURES QUICKLY AT HIGH TEMPERATURES, AND SLOWLY AT LOW TEMPERATURES. IT IS DIFFICULT TO CURE AT TEMPERATURES OF LESS THAN 5°CC, DO NOT USE.
- USE ONLY FOR INTENDED PURPOSE.
-
DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.
DO NOT INHALE, TOUCH OR ALLOW CONTACT WITH SKIN. RISK OF POISONING, IRRITATION AND SKIN RASH.
AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.