Procedure and Tips.
1.A dull, faded bumper will hurt the overall beauty of your car.
The first step to washing a car is to rinse it off. Use plenty of water to wash away things such as sand or dust which might cause scratching to the paint as you wash the vehicle. Any dirt that remains after this will at least be softened by absorbing moisture, making washing your car easier on your car body. It's best to rinse dirt off from the top downward.
2.First, remove the dirt.
In order to completely remove any oily residue, such as that those left by wax, use a car shampoo to wash your car. Of course, rinse thoroughly when you are done.
3.Apply our glossy restoration treatment for uncoated resin bumpers, Nano Hard.
Apply Nano Hard after drying the surface thoroughly. You would be surprised by how just a little can go a long way, so only apply a small amount to the sponge.
4.Apply evenly in the same direction, avoiding missed spots.
At the same time as applying, restores marvelous black gloss on the whiten bumper before your very eyes. Allow to dry for 5 minutes after applying and wipe down lightly with a clean towel.
Finish!This black gloss lasts more than 6 months.
"Nano Hard" creates a hard transparent glossy coating on the uncoated resin bumper. Unlike other products, it isn't removed by rain or cleaning agents, maintaining the beautiful results for a long time.