This innovative hydrophobic film can be cut to fit any 2D flat/curved eyewear, such as wraparound sports sunglasses or goggles for skiing, snowboarding, water sports, fishing, etc.
The ultrahydrophobic effect repels rain, spray, sweat, and snow to ensure clear vision and a more enjoyable sports experience.
The film is resistant to friction, giving an expected durability of around 6 months, even with normal handling and storage of the eyewear.
The package includes 3 patterns for cutting the film to match the eyewear, but can also be cut into any shape.
| Name of product | SPORTS POWER RAIN REPELLENT FILM 'RainHopper STRONG' |
|---|---|
| JAN code | 4975759206866 |
| Content | Film: 1pc (ca. 150x65mm) Cutting templates: 3pcs |
| Ingredients and materials | Polyethylene |
| Storage and disposal methods | STORE BELOW 40℃, OUT OF DIRECT SUNLIGHT. DISPOSE ACCORDING TO LOCAL REGULATIONS. |
How to use the product
FILM APPLICATION
NOTE: Before application, clean lens thoroughly and be sure to work in a low dust environment.
1. Place face-up on the lens surface, and keep in place with the top sticker.
2. Remove the backing sheet and attach the film to the lens surface. Gently push out any air bubbles with a soft cloth.
3. Remove the top sticker, and then the cover sheet to expose the film surface. NOTE: External reflectivity or the appearance of the lens may be affected.
FILM CUTTING
(When using template)
1. Use the top sticker to attach the template to the front surface of the film
2. Use a marker to draw around the template.
3. Cut according to the lines drawn.
(When cutting to a custom shape)
1. Use the top sticker to attach the film to the lens.
2. Use a marker to draw out the shape of the lens.
3. Cut according to the lines drawn.
MAINTENANCE
Clean using water and a soft cloth. In cases of severe dirt, we recommend Soft99 Shampoo for Glasses.
The film will be gradually degraded by UV, so store away from sunlight.
NOTE: Before application, clean lens thoroughly and be sure to work in a low dust environment.
1. Place face-up on the lens surface, and keep in place with the top sticker.
2. Remove the backing sheet and attach the film to the lens surface. Gently push out any air bubbles with a soft cloth.
3. Remove the top sticker, and then the cover sheet to expose the film surface. NOTE: External reflectivity or the appearance of the lens may be affected.
FILM CUTTING
(When using template)
1. Use the top sticker to attach the template to the front surface of the film
2. Use a marker to draw around the template.
3. Cut according to the lines drawn.
(When cutting to a custom shape)
1. Use the top sticker to attach the film to the lens.
2. Use a marker to draw out the shape of the lens.
3. Cut according to the lines drawn.
MAINTENANCE
Clean using water and a soft cloth. In cases of severe dirt, we recommend Soft99 Shampoo for Glasses.
The film will be gradually degraded by UV, so store away from sunlight.
-
- USE ONLY FOR INTENDED PURPOSE.
DO NOT USE AGAINST ADVISE OF LENSE MANUFACTURER.
DO NOT USE ON SCRATCHED OR DEGRADED LENSES.
DO NOT USE ANTIFOG TREATMENT ON TOP OF THE FILM.
MAY NOT ADHERE TO FLUOROPOLYMER-COATED LENSES.
IF REPELLENCY IS LOST AFTER TIME E.G. 6 MONTHS, REPLACE FILM.
CANNOT BE APPLIED TO LENSES THAT CURVE IN MORE THAN 1 DIMENSION.
- USE ONLY FOR INTENDED PURPOSE.
-
- IN THE RARE EVENT OF REDUCTION IN VISIBILITY AFTER APPLICATION, REMOVE IMMEDIATELY.
KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.
- IN THE RARE EVENT OF REDUCTION IN VISIBILITY AFTER APPLICATION, REMOVE IMMEDIATELY.