Featuring rubber infused with concentrated Glaco rain-repellent, these hydrophobicity-enhancing wipers are also coated with graphite to reduce friction and prevent wiper judder.
*Left-hand drive
For Toyota, Lexus, Honda, Nissan, Mazda, Hyundai, KIA, GM, Jeep, etc
※Fit for many Japanese, Korean and American cars. Not fitted to European or Chinese cars.
| Name of product | Glaco Wiper Aero X |
|---|---|
| JAN code | 4975759113010 |
| Content | 1pc |
How to use the product
Remove dirt and dust from the glass surface. With the glass surface dry, operate the wipers for approximately 3 minutes to activate the water-repellent coating.
*When temperatures are 10°C (50°F) or below, the water-repellent effect may take longer to activate. In such cases, continue operating the wipers until the effect appears. Additionally, raising the glass temperature with the defroster enhances effectiveness.
*Water repellency may take longer to appear during rain or on wet glass surfaces. If no effect is seen, operate the wipers again when the glass surface is dry.
*Using washer fluid with cleaning agents may reduce water repellency.
*Do not wipe off the black powder on the rubber surface; it improves wiper movement. If black residue remains on the glass surface (e.g., at the wiper pivot point), wipe it off with a towel.
*When temperatures are 10°C (50°F) or below, the water-repellent effect may take longer to activate. In such cases, continue operating the wipers until the effect appears. Additionally, raising the glass temperature with the defroster enhances effectiveness.
*Water repellency may take longer to appear during rain or on wet glass surfaces. If no effect is seen, operate the wipers again when the glass surface is dry.
*Using washer fluid with cleaning agents may reduce water repellency.
*Do not wipe off the black powder on the rubber surface; it improves wiper movement. If black residue remains on the glass surface (e.g., at the wiper pivot point), wipe it off with a towel.
-
- DO NOT OPERATE THE WIPER WITH FOREIGN OBJECTS ON THE BLADE, AS THIS MAY SCRATCH THE RUBBER OR GLASS. REMOVE ANY DIRT FROM THE GLASS SURFACE BEFORE USE.
DO NOT WIPE OR CLEAN THE WIPER RUBBER WITH ALCOHOL OR SIMILAR SUBSTANCES, AS THIS MAY CAUSE DEFORMATION OR DETERIORATION, REDUCING ITS WIPING PERFORMANCE. AVOID TOUCHING THE RUBBER PART, AS IT MAY STAIN HANDS OR CLOTHING BLACK. WASH HANDS THOROUGHLY AFTER HANDLING.
THIS PRODUCT'S WATER-REPELLENT EFFECT DOES NOT REPLACE THE WIPER FUNCTION.
OPERATE WIPERS AS NEEDED TO MAINTAIN VISIBILITY DURING RAINFALL.
CAUTION: WHEN DRIVING INTO BRIGHT LIGHT OR EMERGING FROM DARKNESS (E.G., TUNNELS) WITH WIPERS OFF DURING RAINY WEATHER, TEMPORARY FOGGING MAY OCCUR.
IMMEDIATELY ACTIVATE WIPERS TO RESTORE VISIBILITY.
BE AWARE THAT ON HUMID MORNINGS OR EVENINGS, WHEN THERE IS A LARGE TEMPERATURE DIFFERENCE BETWEEN THE INSIDE AND OUTSIDE OF THE VEHICLE, THE WINDSHIELD MAY FOG UP MOMENTARILY WHEN THE WIPERS ARE ACTIVATED.
OPERATING THE WIPERS WHEN THE GLASS SURFACE IS FROZEN CAN DAMAGE THE WIPER RUBBER. BEFORE OPERATING THEM, RAISE THE TEMPERATURE OF THE GLASS SURFACE USING THE DEFROSTER OR USE AN ICE-MELTING AGENT.
- DO NOT OPERATE THE WIPER WITH FOREIGN OBJECTS ON THE BLADE, AS THIS MAY SCRATCH THE RUBBER OR GLASS. REMOVE ANY DIRT FROM THE GLASS SURFACE BEFORE USE.
-
- THIS PRODUCT IS DEVELOPED AND MANUFACTURED SPECIFICALLY FOR WIPING RAIN OFF AUTOMOTIVE GLASS.
DO NOT USE IT FOR ANY OTHER PURPOSE.
REFER TO YOUR VEHICLE'S OWNER'S MANUAL REGARDING THE USE OF THIS PRODUCT.
WHEN REPLACING WIPERS, REPLACE BOTH THE DRIVER'S SIDE AND PASSENGER'S SIDE WITH THE SAME PRODUCT (GLACO WIPER POWER SERIES) AND ALWAYS REPLACE THEM SIMULTANEOUSLY.
INSTALLING INCOMPATIBLE OR INCORRECTLY SIZED WIPERS MAY CAUSE THEM TO DETACH DURING USE, SCRATCH THE GLASS, RESULT IN POOR WIPING PERFORMANCE, PRODUCE ABNORMAL NOISE, OR POTENTIALLY CAUSE ACCIDENTS.
ALWAYS VERIFY COMPATIBILITY WITH YOUR SPECIFIC VEHICLE AND THE COMPATIBILITY CHART.
IF THE WIPER ARM OR MOTOR IS DEFECTIVE, THIS PRODUCT MAY NOT PERFORM OPTIMALLY.
DO NOT BEND OR DEFORM THIS PRODUCT, AND DO NOT DISASSEMBLE THE JOINTS OR CLAMPING PARTS.
NOTE: WE CANNOT BE HELD RESPONSIBLE FOR ACCIDENTS, MALFUNCTIONS, DAMAGE, OR BREAKAGE OF THIS PRODUCT CAUSED BY INCORRECT REPLACEMENT METHODS OR FORCED INSTALLATION.
- THIS PRODUCT IS DEVELOPED AND MANUFACTURED SPECIFICALLY FOR WIPING RAIN OFF AUTOMOTIVE GLASS.