A single water-repellent spray coating formulated for use across body paint, glass, plastic trim, wheels, and Paint Protection Film (PPF) - a simple and convenient solution for exterior surfaces.
The self-levelling formula makes application quick and easy.
Protection lasts up to 3 months on body paint and 2 months on glass.
| Name of product | Multi Defender |
|---|---|
| JAN code | 4975759103400 |
| Content | 500mL |
| Ingredients and materials | Siloxanes, silicone resin, alcohol |
| Storage and disposal methods | •Turn the nozzle "OFF" and avoid direct sunlight, temperature over 40˚C, wet or freezing conditions. •Discharge, treatment, or disposal may be subject to national, state, or local laws. |
How to use the product
1. Wash off sand, mud, and dust. May be used on wet or dry surfaces.
2. Shake well before use. Turn the nozzle to the ON position, and spray evenly onto the wet body, about one shot per 50cm square.
3. Spread around and wipe up with a microfiber cloth, wringing out cloth regularly while working.
NOTE:
Treat glass first, then body.
If streaking occurs, rinse cloth with water and wring out thoroughly before wiping down the affected area.
When using on a dry vehicle, dampen and wring out cloth before use.
To treat grills and wheels, do not spray directly; spray onto the cloth and wipe surface.
After application, optionally keep dry for 30 minutes or more to maximise coating efficiency.
Before treating a repainted, degraded or matte surface, test first in an inconspicuous area.
2. Shake well before use. Turn the nozzle to the ON position, and spray evenly onto the wet body, about one shot per 50cm square.
3. Spread around and wipe up with a microfiber cloth, wringing out cloth regularly while working.
NOTE:
Treat glass first, then body.
If streaking occurs, rinse cloth with water and wring out thoroughly before wiping down the affected area.
When using on a dry vehicle, dampen and wring out cloth before use.
To treat grills and wheels, do not spray directly; spray onto the cloth and wipe surface.
After application, optionally keep dry for 30 minutes or more to maximise coating efficiency.
Before treating a repainted, degraded or matte surface, test first in an inconspicuous area.
-
- Use only for intended purpose.
Performance may be affected by condition of paint or ceramic coating.
This product creates a hydrophobic (water-repellent) effect.
If below 10°C, use while heating the glass from the inside (e.g. with defogger).
This product is compatible with Glaco rain repellents, but other brands may reduce performance.
Remove coating first with abrasive glass cleaner or traffic film remover.
Do not use on tinted or specially-coated mirrors. In hot conditions, when there is a large difference between internal and external temperature, use of wipers may cause temporary clouding. Depending on usage patterns, unevenness can occur; in this case reapply.
Do not use traffic film removal washer liquid. Degraded or old wipers may cause juddering.
- Use only for intended purpose.
-
- Do not inhale or drink
Harmful for human body.
Keep out of reach of children.
Use protective glove, if needed.
Do not spray against human body.
In case of inhalation, drink plenty of water, and seek medical attention.
If in eyes, immediately flush eyes with plenty of water for at least 15 min.
If feeling sick, immediately stop use.
- Do not inhale or drink