Perfect for cleaning tar and stubborn dirt from the body, wheels, and tyres, this easy-to-use spray is particularly effective at remove oily contaminants such as pitch and degraded coatings, as well as water stains, insects, and droppings. Pair with Iron Terminator (10333) for ultra-clean wheels and tyres!
Powerful alkali formula needs no compound to thoroughly remove dirt. Orange oils also effectively remove insects and bird droppings!
Also highly effective as a degreasing agent, it can be used as a primer before applying waxes, sealants, or coatings.
| Name of product | Tar Exterminator |
|---|---|
| JAN code | 4975759103387 |
| Content | 500mL |
| Ingredients and materials | Anionic surfactant, non-ionic surfactant, aqueous solvent, auxiliary cleaning agent |
| Storage and disposal methods | Store below 40°C, out of direct sunlight. Avoid humidity, freezing, and wetting. •Close nozzle and store upright. •Use/release contents completely before disposing according to local regulations. |
How to use the product
1. Wash off sand, mud
or dust in advance.
2. Turn the nozzle to the ON position, and spray directly on the surface.
3. Allow to dwell for around 30 seconds, before agitating gently with a cloth, or brush.
If stain remains, repeat operation.
4. Ensure to rinse thoroughly with water, and dry with a towel.
Failure to remove all product may damage surfaces.
5. Rinse nozzle with water after use.
NOTE: It is recommended to work on a panel-by-panel basis. When used for wheels, test brakes at low speed after use. Surfaces will be stripped of all coatings, waxes, etc. So please reapply after use to restore shine, water-repellency, etc.
or dust in advance.
2. Turn the nozzle to the ON position, and spray directly on the surface.
3. Allow to dwell for around 30 seconds, before agitating gently with a cloth, or brush.
If stain remains, repeat operation.
4. Ensure to rinse thoroughly with water, and dry with a towel.
Failure to remove all product may damage surfaces.
5. Rinse nozzle with water after use.
NOTE: It is recommended to work on a panel-by-panel basis. When used for wheels, test brakes at low speed after use. Surfaces will be stripped of all coatings, waxes, etc. So please reapply after use to restore shine, water-repellency, etc.
-
- •Do not use except for intended purpose.
•Test in an inconspicuous area before use.
•Do not pull trigger while nozzle is in OFF position. May damage nozzle.
•Do not use on deteriorated or repainted areas.
•If liquid contacts other surfaces, wipe off immediately.
•Do not leave liquid to dwell for extended periods.
•Do not use under strong sunlight or when the surface is hot.
•Do not scrub with excessive force.
•Use in a well-ventilated area.
•Wash hands with soap after use.
- •Do not use except for intended purpose.
-
- DO NOT INHALE OR DRINK: Harmful to the human body
•Use protective glove.
•Keep out reach of children and vulnerable people.
•Do not spray toward human body.
EMERGENCY MEASURES: •IF SWALLOWED, seek medical attention immediately.
•IF IN EYES, wash immediately with water for at least 15 minutes. If irritation persists, seek medical attention.
•IF ON SKIN, wash immediately with soap and water. If irritation persists, seek medical attention.
•IF FEELING UNWELL during use,rest in a well-ventilated area. If irritation persists, seek medical attention.
- DO NOT INHALE OR DRINK: Harmful to the human body