This new Glaco features Q-AD (Quick Adhesion & Quick Dry) technology, Allowing a quick and easy application. Just apply before washing, and remove with shampoo during a normal wash... no waiting, no wiping! Enjoy instant water repellency, a clear finish, and great durability.
The new integrated applicator makes coating the corners easy..
Each bottle treats up to 10 windscreens.
| Name of product | Glaco QAD |
|---|---|
| JAN code | 4975759049586 |
| Content | 120ml |
| Ingredients and materials | Alcohol, siloxanes, acid |
| Storage and disposal methods | WHEN STORING, MAKE SURE TO TIGHTLY CLOSE THE SCREW CAP. DO NOT STORE IN DIRECT SUNLIGHT, IN PLACES WHERE THE TEMPERATURE EXCEEDS 40°C, NEAR FIRE, OR INSIDE A VEHICLE. WHEN DISPOSING, USE UP ALL CONTENTS AND FOLLOW THE DISPOSAL INSTRUCTIONS OF YOUR LOCAL MUNICIPALITY. |
How to use the product
NOTE: If there are any visible stains or residues on the glass before application, remove them first to prevent scratches or streaks.
Make sure the glass surface is completely dry before use.
Turn the screw cap anticlockwise to remove the cover.
1. To prevent the liquid from spilling, press the felt section against the glass, gently squeeze the bottle to release the liquid, and allow the felt to absorb it.
2. Hold the bottle gently and apply evenly and thoroughly, adding liquid as needed, then allow to dry.
NOTE: For best results, apply in straight, vertical and horizontal criss-cross strokes.
3. Wash the entire treated area using neutral car shampoo and a car wash sponge.
4. Rinse thoroughly with plenty of water, and wipe dry as normal.
Make sure the glass surface is completely dry before use.
Turn the screw cap anticlockwise to remove the cover.
1. To prevent the liquid from spilling, press the felt section against the glass, gently squeeze the bottle to release the liquid, and allow the felt to absorb it.
2. Hold the bottle gently and apply evenly and thoroughly, adding liquid as needed, then allow to dry.
NOTE: For best results, apply in straight, vertical and horizontal criss-cross strokes.
3. Wash the entire treated area using neutral car shampoo and a car wash sponge.
4. Rinse thoroughly with plenty of water, and wipe dry as normal.
-
- AVOID CONTACT WITH NON-GLASS SURFACES. WIPE OFF IMMEDIATELY IF SPILLED ON PAINT. DO NOT POINT FELT APPLICATOR TOWARD BODY OR EYES. DO NOT SQUEEZE BOTTLE AWAY FROM GLASS. DO NOT USE IN DIRECT SUN OR ON HOT GLASS. AVOID USE BELOW 10°C UNLESS GLASS IS WARMED. ENSURE GLASS IS CLEAN, DRY, AND FREE OF TRAFFIC FILM. REMOVE OLD COATINGS IF NEEDED. DO NOT LEAVE LIQUID ON FOR EXTENDED PERIOD. CLEAN AND DRY FELT HEAD IF DIRTY. USE ONLY NEUTRAL CAR SHAMPOO. AFTER USE, CLOSE CAP FIRMLY. DO NOT OVERTIGHTEN. FOR GLASS ONLY. DO NOT USE ON PLASTIC, HEADLIGHTS, MIRRORS, OR INSIDE WINDOWS. CHECK OWNER’S MANUAL BEFORE USE. REPLACE WORN WIPERS. DO NOT USE IN EXTREME TEMPERATURE DIFFERENCES. WASH HANDS AFTER USE. REAPPLY WHEN WATER REPELLENCY WEAKENS. USE WATER-BASED WASHER FLUID ONLY.
-
- DO NOT INHALE OR INGEST. HARMFUL TO HUMAN BODY. AVOID CONTACT WITH EYES AND SKIN. USE PROTECTIVE GLOVES IF SKIN IS SENSITIVE. FLAMMABLE; KEEP AWAY FROM FIRE. KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.