Apply this, and rain will bead up and roll off glass or plastic, cleanly taking with it any other water along the way. The first Glaco to be suitable for both plastic and glass! Use it on your headlight lenses, lamp covers, wind guards, helmet shield, or goggles! No need to wait for drying, just apply and wipe off.
Name of product | Glaco Blave |
---|---|
JAN code | 4975759049531 |
Content | 70ml |
Ingredients and materials | Silicones, alcohols |
Storage and disposal methods | STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING. USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS. |
How to use the product
Note: Apply only to clean, dry surfaces.
1. Remove the cap, press the felt applicator onto the surface and gently squeeze the bottle to let out some liquid.
2. Use the felt applicator to rub the liquid firmly into the surface. Be sure to get complete coverage.
3. Without allowing to dry, wipe off with the included cloth.
1. Remove the cap, press the felt applicator onto the surface and gently squeeze the bottle to let out some liquid.
2. Use the felt applicator to rub the liquid firmly into the surface. Be sure to get complete coverage.
3. Without allowing to dry, wipe off with the included cloth.
-
- USE ONLY FOR INTENDED PURPOSE.
CHECK CAR INSTRUCTION MANUAL BEFORE USE.
IF THE PRODUCT COMES INTO CONTACT WITH ANYWHERE OTHER THAN THE DESIRED PLACE, WIPE OFF IMMEDIATELY WITH A CLEAN, DAMP TOWEL TO PREVENT DAMAGE.
DO NOT OPEN OR USE TOWARDS THE FACE, EYES OR BODY. MAKE SURE PRODUCT DOES NOT TO COME INTO CONTACT WITH CLOTHING, IF THIS OCCURS WASH IMMEDIATELY.
TO AVOID SPLATTERING, ONLY RELEASE LIQUID WHEN THE BOTTLE IS IN CONTACT WITH THE GLASS.
WHEN THE TEMPERATURE IS LESS THAN 10°C, APPLY WHILE WARMING THE GLASS WITH THE HEATER AND DEFOGGER.
AVOID APPLYING IN TEMPERATURES LESS THAN 0°C.
DO NOT USE IN DIRECT SUNLIGHT OR ON HOT SURFACES. DO NOT LEAVE PRODUCT ON FOR A LONG TIME AS IT WILL CAUSE UNEVENNESS AND STAINS.
IF FELT BECOMES DIRTY, REMOVE AND CLEAN THOROUGHLY AS DIRT MAY CAUSE SCRATCHES. ALLOW TO DRY COMPLETELY BEFORE USING AGAIN. IF THE FELT IS STILL WET, THE FULL EFFECT CANNOT BE ACHIEVED. WHEN USING FOR THE FIRST TIME, IF THE CAR IS ALREADY TREATED WITH A COATING OTHER THAN GLACO, THE FULL EFFECT MAY NOT BE ACHIEVED. IN THIS CASE, PLEASE BUY AN OIL-REMOVING OR COATING-REMOVING CLEANER. SOLD SEPARATELY.
AFTER APPLICATION, WASH WITH CAR SHAMPOO OR CLEANER.
ENSURE THE COATING IS TRANSPARENT AFTER APPLICATION.
BE CAREFUL. WHEN THERE ARE CHANGES IN TEMPERATURE/HUMIDITY, LIKE IN THE MORNING OR WHEN COMING OUT A TUNNEL, GLASS MAY TURN TEMPORARILY WHITE.
IN THIS CASE, USE THE WIPERS IMMEDIATELY TO REGAIN VISIBILITY. DO NOT USE OIL FILM REMOVAL TYPE WINDSHIELD WASHER LIQUID.
FOR BEST RESULTS, USE WATER-REPELLENT WASHER SOLUTION (GLACO WASHER SOLUTION).
WE RECOMMEND USING GLACO WIPERS, AS REGULAR WIPER RUBBER MAY BE DAMAGED BY GLACO.
WASH HANDS WELL WITH SOAP AFTER USE.
AT THE TIME OF APPLICATION, DO NOT APPLY WITH EXCESSIVE FORCE. MAY CAUSE DAMAGE, DEFORMATION AND SCRATCHES. WHEN WASHING, DO NOT USE EXCESSIVE FORCE.
RESULTS MAY VARY DUE TO A NUMBER OF FACTORS, BEFORE USING, TEST ON AN INCONSPICUOUS AREA FIRST.
- USE ONLY FOR INTENDED PURPOSE.
-
DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.
AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE. BE CAREFUL. WHEN THERE ARE CHANGES IN TEMPERATURE/HUMIDITY, LIKE WHEN COMING OUT A TUNNEL, GLASS MAY TURN TEMPORARILY WHITE.
IN THIS CASE, USE THE WIPERS IMMEDIATELY TO REGAIN VISIBILITY.
KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.
Product Q&A
- Q
Can it be used for other types of plastic?
- Q
Can it be used on side mirrors?
- Q
After treatment, it became uneven. What should I do?
- Q
Can glass or transparent plastic parts be treated even if they are wet?
- Q
Can it also be used for anti-glare helmet shields?
- Q
How many windshields can I treat with one product?