The G'ZOX series' first total coating system for interiors uses advanced chemical technology to create a beautiful and comfortable interior space.
The ceiling and floor mat coatings have excellent deodorant, antibacterial, antiviral, and antifungal effects thanks to a newly developed photocatalytic coating to protect the roof and floors, which tend to harbour odours and germs, dramatically improving cleanliness and comfort of the interior of the car.
Another specialised coating has been prepared for seats, which are particularly liable to get dirty. For fabrics, it has a water-repellent and antifouling effect, preventing sweat, crumbs, spilled food, and other stains from penetrating into the fabric sheet fibres, and so maintaining a beautiful and comfortable interior for a longer period of time.
| Name of product | G'ZOX Comfort Guard - Fabric Package |
|---|---|
| JAN code | 4975759037309 |
| Content | Ceiling and floor mat coating 100ml Trigger spray 1pc Sponge 1pc Cloth 10pc Fabric coating 100ml ×2 Trigger spray 1pc Sponge 1pc Application manual 1pc Application certificate 1pc Application sticker 1pc Fabric cleaner 30ml Fabric coating 30ml Cleaning sponge (blue) 1pc Cleaning sponge (yellow) 4pc Maintenance manual 1pc Maintenance Pouch 1pc |
| Ingredients and materials | Ceiling and floor mat coating: titanium oxide, amorphous silica Fabric coating: fluoropolymer, ethanol Fabric cleaner: detergent, diethanolamine, polar solvent |
How to use the product
(Ceiling)
1. Remove the cap and inner plug, and attach the trigger spray.
2. Wrap the application cloth around the sponge.
3. Spray 5 shots onto the cloth wrapped around the sponge.
* If the non-woven fabric repels the liquid, use your fingers to work the liquid into the cloth.
* Spray outside the vehicle to prevent contact with other surfaces.
4. Apply to a 40x40 cm square in a criss-cross patter, leaving no gaps.
* Do not spray directly on the ceiling surface.
* For highly absorbent surfaces, use 3 shots, and apply to a smaller (30x30 cm) area each time.
5. If the cloth becomes ragged or dirty, use a new surface or new cloth. (About once every 4 40x40cm squares)
* If you continue to use a ragged cloth, fibres may adhere to the surface.
6. Dry for ca. 30 minutes in summer or 1 hour or more in winter.
* Use masking if necessary.
(Floor mats and carpet)
1. Remove the floor mat.
2. Spray directly onto the mat / floor until the surface is moist.
3. When the surface of the mat / floor is dry, reinsert the mat.
* The larger the amount of spray, the longer the drying time. Be careful not to spray too much on deep-pile mats.
(Fabric seats)
1. Shake the container well, remove the cap and inner plug, and attach the trigger spray.
2. Spray until the entire seat is wet, and smooth down the surface of the seat with a sponge.
3. Dry for 2 hours in summer or 4 hours or more in winter.
* Drying time varies depending on the amount of spray.
* Spray the liquid evenly, a little at a time. Over-application may cause stains.