A long-lasting, rain-repellent, glass protection system boasting increadible speed and ease-of application. This coating is based on Fusso Technology to provide a powerfully hydrophobic coating, that withstood over 400,000 back-and-forth wipes of the wipers in our tests.
Name of product | G'ZOX Prime View |
---|---|
JAN code | 4975759037248 |
Content | Abrasive cleaner: 125 ml Surface stabiliser: 125 ml Water repellent coating: 8 ml x 10 Glass-polishing sponge Nonwoven cloth x 30 Application sponge x 2 Wipe-up finishing cloth x 2 |
Ingredients and materials | Abrasive cleaner: silicon carbide, abrasives, crystalline silica Surface stabiliser: n-propanol, propylene glycol monomethyl ether Water repellent coating: fluorinated solvent, fluoropolymer |
How to use the product
THIS PRODUCT IS FOR PROFESSIONAL USE ONLY
1. Wash glass surface with detergent before use.
2. Mask off surrounding areas.
3. Polish the glass using the included abrasive cleaner, by hand using the included sponge, or by machine, until the liquid remains flat on the surface.
4. Thoroughly rinse the surface with water. Use a cloth or sponge to accelerate removal. Clean and dry application tools.
5. Thoroughly dry the surface and all surrounding crevices with a towel.
6. Layer TWO unwoven cloths one atop the other, and and fold BOTH in half TOGETHER. Apply the surface stabiliser to degrease the entire glass surface thoroughly.
7. After thoroughly degreasing and drying the surface, wrap a FRESH & CLEAN unwoven cloth around the application sponge, apply the coating liquid to the sponge, and treat the glass surface THOROUGHLY, adding liquid as necessary. If the sponge or surface become wet, application is IMPOSSIBLE. If wetting occurrs, ENSURE THE SURFACE AND SURROUNDING AREAS ARE DRY and use the spare sponge and a new cloth.
N.B. USE ALL COATING LIQUID WITHIN 15 MINUTES OF OPENING.
8. After the surface is dry (5-15 minutes, depending on air temperature), wipe down the surface with the included wipe-up cloth. Dry cloth after use. Check for residue from inside the vehicle.
KEEP SURFACE DRY FOR AT LEAST 2 HOURS.
9. Dispose of nonwoven cloths. Dry other tools and store in box.
1. Wash glass surface with detergent before use.
2. Mask off surrounding areas.
3. Polish the glass using the included abrasive cleaner, by hand using the included sponge, or by machine, until the liquid remains flat on the surface.
4. Thoroughly rinse the surface with water. Use a cloth or sponge to accelerate removal. Clean and dry application tools.
5. Thoroughly dry the surface and all surrounding crevices with a towel.
6. Layer TWO unwoven cloths one atop the other, and and fold BOTH in half TOGETHER. Apply the surface stabiliser to degrease the entire glass surface thoroughly.
7. After thoroughly degreasing and drying the surface, wrap a FRESH & CLEAN unwoven cloth around the application sponge, apply the coating liquid to the sponge, and treat the glass surface THOROUGHLY, adding liquid as necessary. If the sponge or surface become wet, application is IMPOSSIBLE. If wetting occurrs, ENSURE THE SURFACE AND SURROUNDING AREAS ARE DRY and use the spare sponge and a new cloth.
N.B. USE ALL COATING LIQUID WITHIN 15 MINUTES OF OPENING.
8. After the surface is dry (5-15 minutes, depending on air temperature), wipe down the surface with the included wipe-up cloth. Dry cloth after use. Check for residue from inside the vehicle.
KEEP SURFACE DRY FOR AT LEAST 2 HOURS.
9. Dispose of nonwoven cloths. Dry other tools and store in box.