1. SOFT99 TOP
  2. Product Information
  3. Car Wash
  4. Exterior Parts Coating
  5. MEGAMI Headlight Refresh

MEGAMI Headlight Refresh

A two-component headlight cleaner & coating that revives the sharp clearness of headlights.
Both abrasive and chemical components dissolve and polish the surface to remove yellowing and fading. The coating is composed of a glass-based hard layer and a hydrophobic stain-repellent layer, which protects the headlights, lasting around 6 months, according to in-house testing.

Name of product MEGAMI Headlight Refresh
JAN code 4975759031352
Content Cleaner:50ml
Coating:10ml
Blue Sponge:2 pcs
Yellow Sponge:2 pcs
Non-woven Cloth:2 pcs
Protective Glove:1 pc
Ingredients and materials Cleaner: Surfactants, solvents
Coating: Silicon-based reagant, alcohols
Storage and disposal methods CLEANER:
STORE SEALED, AWAY FROM DIRECT SUNLIGHT, FREEZING TEMPURATURES, AND AREAS OVER 40℃
USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS.

COATING:
STORE SEALED, AWAY FROM DIRECT SUNLIGHT, FREEZING TEMPURATURES, AND AREAS OVER 40℃
USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS.

How to use the product

Wash and dry thoroughly before use.

Remove any other coatings before use.

Please wear the included protective gloves when working.

1. Shake the Cleaner well, apply an appropriate amount of liquid to the black side of the blue sponge, and polish until yellowing and fading have been removed.

2. After polishing, wet the non-woven cloth with water, and wring out firmly. Wipe the polished area clean, and dry it completely. If yellowing or faded areas remain, repeat the process from step (1).

3. Soak the Coating thoroughly into the entire white surface of the yellow sponge. Apply one coat in one direction, so that no streaks remain. Keep adding liquid to the sponge as necessary, until the full surface has been treated.

The liquid will become sticky as it hardens. Avoid touching the area where you have finished applying.

Do not touch or wet for 24 hours after application.

If coating is unusually uneven, it may be removed using "Silicone Off" during the curing phase (3-4 days). After full curing, removal must be conducted using a fine compound.
    • CLEANER:
      USE ONLY FOR INTENDED PURPOSE.
      DO NOT USE ON CRACKED, MATTE, OR WRINKLED SURFACES.
      DO NOT USE FOR HEADLIGHTS THAT HAVE NOT DETERIORATED, COLORED FINISHES, OR HEADLIGHTS WITH FILM.
      DO NOT USE IN WINDY OR DUSTY CONDITIONS. MAY CAUSE SCRATCHES.
      WASH HANDS THOROUGHLY WITH SOAP AFTER USE.

      COATING:
      USE ONLY FOR INTENDED PURPOSE.
      THE LIQUID REACTS WITH MOISTURE IN THE AIR AND HARDENS, SO CLOSE THE CAP IMMEDIATELY AFTER USE AND USE ALL PRODUCT AS SOON AS POSSIBLE.
      DO NOT USE UNDER DIRECT SUNLIGHT, IN RAIN, IN HUMID CONDITIONS, OR UNDER 10℃.
      WASH HANDS THOROUGHLY WITH SOAP AFTER USE.
    • CLEANER: DO NOT INHALE: HARMFUL
      DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED.
      FLAMMABLE. KEEP AWAY FROM FIRE.
      AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
      IF INGESTION OCCURS, DO NOT CAUSE VOMITING. RINSE MOUTH AND CONTACT A MEDICAL PROFESSIONAL IMMEDIATELY.
      IF ON EYES OR SKIN, RINSE IMMEDIATELY WITH WATER. IF SYMPTOMS PERSIST, CONTACT A MEDICAL PROFESSIONAL.
      IF FEELING UNWELL DURING USE, STOP USE IMMEDIATELY. IN ALL CASES, IF IRRITATION PERSISTS, CONTACT A MEDICAL PROFESSIONAL.
      KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.

      COATING:
      DO NOT INHALE: HARMFUL
      AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
      FLAMMABLE. KEEP AWAY FROM FIRE.
      KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.
      IF ON EYES OR SKIN, RINSE IMMEDIATELY WITH WATER. IF SYMPTOMS PERSIST, CONTACT A MEDICAL PROFESSIONAL.
      IF FEELING UNWELL DURING USE, STOP USE IMMEDIATELY. IN ALL CASES, IF IRRITATION PERSISTS, CONTACT A MEDICAL PROFESSIONAL.

Product Q&A

Products that solve similar problems and symptoms

View category: Exterior Parts – Coating