Over time, road contaminants and UV cause headlight lenses to deteriorate, and become foggy or even yellow. Not only does this look dirty, it also affects the quality of light given out. Because it occurs gradually, it may go unnoticed, but a reduction in light quality adversely affects visibility and can lead to accidents.
Our two-step headlight restoration kit not only brings back clarity and shine to hazy or yellowed headlights and other plastic parts, but also adds a hard topcoat to protect your lenses from dirt and UV radiation.
This kit includes Base Cleaner, Hard Topcoat, a cloth and an applicator sponge.
Name of product | LIGHT ONE |
---|---|
JAN code | 4975759031338 |
Content | Base Cleaner : 50ml Coating Liquid : 8ml |
Ingredients and materials | Silicon compounds, alcohols |
How to use the product
1. First, wash and dry the lenses.
2. Shake the bottle of Base Cleaner well, and apply to one side of the included cloth. Spread around evenly, and polish the deteriorated areas until clarity returns.
3. When finished, wipe off the Base Cleaner with the clean side of the cloth.
4. Shake the bottle of Hard Topcoat well, apply to the included sponge, and spread around evenly.
5. After about one minute of drying, spread around again with the opposite side of the sponge, to smooth out any unevenness.
Note: Do not touch or wet for 24 hours after application. Full hardening ℃curs within 4 days. Coating must be applied with the included sponge. Do not reuse sponges.
2. Shake the bottle of Base Cleaner well, and apply to one side of the included cloth. Spread around evenly, and polish the deteriorated areas until clarity returns.
3. When finished, wipe off the Base Cleaner with the clean side of the cloth.
4. Shake the bottle of Hard Topcoat well, apply to the included sponge, and spread around evenly.
5. After about one minute of drying, spread around again with the opposite side of the sponge, to smooth out any unevenness.
Note: Do not touch or wet for 24 hours after application. Full hardening ℃curs within 4 days. Coating must be applied with the included sponge. Do not reuse sponges.
-
- USE ONLY FOR INTENDED PURPOSE.
DO NOT USE FOR HELMET SHIELDS, MONITORS, NAVIGATION SYSTEMS, OR WHERE VISIBILITY MAY BE A PROBLEM. DO NOT GET WET DURING DRYING.
LIQUID REACTS WITH AIR, CLOSE CAP IMMEDIATELY AFTER USE.
DO NOT USE IN HOT, RAINY OR COLD WEATHER LESS THAN 10°C DEGREES. MAY CAUSE IRREGULARITIES.
USE SPONGE PROVIDED.
WASH HANDS WELL WITH SOAP AFTER USE.
- USE ONLY FOR INTENDED PURPOSE.
-
DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.
AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE. KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.