The special oil-based activator, OX-20, is added, which brings out the incredible detergency. By just using Flushing Oil when you change the oil, it washes off the harmful sludge and restores engine power.]
| Name of product | Flushing Oil |
|---|---|
| JAN code | 4975759031123 |
| Content | 350ml |
| Ingredients and materials | Mineral oil, cleaning agents |
How to use the product
1. Leave the car idling for 5-6 minutes, and then stop the engine. After that, pour Flushing Oil into the engine oil.
2. Put the engine oil's cap back on, and then leave the car idling for 10-15 minutes with 1000-1500 engine rotation.
3. Stop the engine and drain the old oil completely before the engine is cooled down, and then pour a moderate amount of new oil into it.
* We recommend exchanging the oil element at the same time.
* Use more than 2 cans for the lorry.
2. Put the engine oil's cap back on, and then leave the car idling for 10-15 minutes with 1000-1500 engine rotation.
3. Stop the engine and drain the old oil completely before the engine is cooled down, and then pour a moderate amount of new oil into it.
* We recommend exchanging the oil element at the same time.
* Use more than 2 cans for the lorry.
-
- USE ONLY FOR INTENDED PURPOSE.
IF THE PRODUCT COMES INTO CONTACT WITH ANYWHERE OTHER THAN THE DESIRED PLACE, WIPE OFF IMMEDIATELY WITH A CLEAN TOWEL TO PREVENT DAMAGE.
DO NOT OPEN OR USE TOWARDS THE FACE, EYES OR BODY. MAKE SURE PRODUCT DOES NOT TO COME INTO CONTACT WITH CLOTHING, IF THIS OCCURS WASH IMMEDIATELY.
DURING USE, ENGINE MAY BE HOT. BEWARE OF BURNS. WEAR PROTECTIVE GLOVES.
TURN OF ENGINE BEFORE USE.
WASH HANDS WELL WITH SOAP AFTER USE.
- USE ONLY FOR INTENDED PURPOSE.
-
- DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.
USE ONLY IN WELL-VENTILATED AREAS. DO NOT INHALE.
AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE. KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.
- DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.