The wash-and-coat formula imparts a water-repellent effect not only to the body, but also to the glass... at the same time! Simply use it like any other shampoo to wash the vehicle. Washing and coating... all-in-one!
In "Wash Mode", it can be diluted and used in the same way as a normal shampoo to clean the car, but also provides around 2 months of hydrophobicity for the washed surfaces.
In "Coating Mode", the liquid is applied directly to the surface, and creates a strong water repellent layer that lasts for around 3 months... on both body and glass!
With a pH-neutral formula, it is compatible with all colours, it is also useful as a maintenance shampoo for body and glass treated with other hydrophobic coatings.
| Name of product | ALAUNEN BACHI BACHI UP! Clean and Coat |
|---|---|
| JAN code | 4975759029045 |
| Content | 700ml |
| Ingredients and materials | Surfactants, hydrophobic polymers |
| Storage and disposal methods | STORE BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID FREEZING. STORE UPRIGHT. DO NOT STORE IN VEHICLE. DISPOSE ACCORDING TO LOCAL REGULATIONS. |
How to use the product
* First, turn the pump head to open, while grasping the base of the pump. The pump head should rise and open.
* Rinse the entire vehicle with water in advance to wash away any dirt or dust.
Wash Mode
1. Use a bucket and dilute the liquid on a ratio of 5 pushes to 1L (about 2 pints) of water. You should need around 3L to wash a medium-sized car. You can create more foam by pouring the water from a greater height.
2. Soak a sponge or cloth in the bucket, and use it to wash the body and glass.
3. After washing, rinse thoroughly with water until the foam disappears.
Coating Mode
1. Pump liquid 2 or 3 times directly onto a sponge or cloth soaked in water, and spread around one panel area.
2. Let sit for 1 minute in hot conditions and 3 minutes in cold, and then rinse with water or wipe off with a cloth soaked in water, before drying.
NOTE: Work panel-by-panel, e.g. roof, glass, bonnet, door, etc., and both "modes" become even more water-repellent over time.
* Rinse the entire vehicle with water in advance to wash away any dirt or dust.
Wash Mode
1. Use a bucket and dilute the liquid on a ratio of 5 pushes to 1L (about 2 pints) of water. You should need around 3L to wash a medium-sized car. You can create more foam by pouring the water from a greater height.
2. Soak a sponge or cloth in the bucket, and use it to wash the body and glass.
3. After washing, rinse thoroughly with water until the foam disappears.
Coating Mode
1. Pump liquid 2 or 3 times directly onto a sponge or cloth soaked in water, and spread around one panel area.
2. Let sit for 1 minute in hot conditions and 3 minutes in cold, and then rinse with water or wipe off with a cloth soaked in water, before drying.
NOTE: Work panel-by-panel, e.g. roof, glass, bonnet, door, etc., and both "modes" become even more water-repellent over time.
-
- USE ONLY FOR INTENDED PURPOSE.
USE ONLY AFTER READING VEHICLE MANUAL.
WHEN USED ON DEGRADED OR REPAINTED SURFACES, TEST FIRST IN AN INCONSPICUOUS AREA.
HYDROPHOBIC EFFECT MAY BE REDUCED BY THE CONDITION OF PAINT OR GLASS.
DO NOT LEAVE WET OR USE IN HOT CONDITIONS. MAY LEAD TO STAINS OR UNEVENNESS.
USAGE IN HOT CONDITIONS OR COMPRESSING THE BOTTLE MAY LEAD TO LEAKAGE.
DO NOT USE ON HUMANS.
AFTER USE, WASH HANDS THOROUGHLY WITH SOAP.
KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.
- USE ONLY FOR INTENDED PURPOSE.
-
- DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED.
AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
FLAMMABLE.
KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.
- DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED.