The ultrafine, yet stiff brush makes it easy to remove dirt from the detailed surface of tyre walls.
A double layer of 70,000 brush hairs, each half the width of a human hair, easily work into the fine surface of the rubber, releasing and removing dirt. The easy-hold grip and flat surface make it suitable and comfortable for use on a wide-range of tyres.
The included finger guard protects against scratches when cleaning the lower part of the tyre.
| Name of product | DiGloss Kamitoré Tire Brush |
|---|---|
| JAN code | 4975759020967 |
| Content | 2 pcs |
| Ingredients and materials | Brush: Polyester Sponge: Polyethylene, polyurethane |
| Storage and disposal methods | AFTER USE, WASH WITH PH-NEUTRAL DETERGENT, DRY, AND STORE AWAY FROM DIRECT SUNLIGHT OR HEAT. DISPOSE ACCORDING TO LOCAL REGULATIONS. |
How to use the product
Before use, remove all dust and dirt with water.
Ensure brush is fully wet before use.
Brush gently to preserve the fibre structure. Too much pressure will eventually damage the cleaning surface.
May be used with water, or with car shampoo. We recommend DiGloss Kamitoré Wheel & Tire Cleaner.
After use, wash with pH-neutral detergent, squeeze out excess water, and dry before storage.
How to make the finger guard:
1. Push the U shaped flap through the square hole.
2. Fold both layers twice to create a Π shape.
3. push the flap into the slit on the back of the sponge.
Ensure fingers do not project too far from the guard.
Do not allow the guard to contact other painted or plastic surfaces.
This guard does not guarantee full protection from injury. Always take care when working.
Ensure brush is fully wet before use.
Brush gently to preserve the fibre structure. Too much pressure will eventually damage the cleaning surface.
May be used with water, or with car shampoo. We recommend DiGloss Kamitoré Wheel & Tire Cleaner.
After use, wash with pH-neutral detergent, squeeze out excess water, and dry before storage.
How to make the finger guard:
1. Push the U shaped flap through the square hole.
2. Fold both layers twice to create a Π shape.
3. push the flap into the slit on the back of the sponge.
Ensure fingers do not project too far from the guard.
Do not allow the guard to contact other painted or plastic surfaces.
This guard does not guarantee full protection from injury. Always take care when working.
-
- USE ONLY FOR INTENDED PURPOSE.
DO NOT USE ON CRACKED OR DAMAGED TYRES.
DO NOT USE EXCESSIVE FORCE.
IF DROPPED, ENSURE BRUSH SURFACE IS THOROUGHLY CLEAR OF SAND AND GRIT BEFORE USE.
AVOID BRUSH CONTACT WITH BODY AND WHEEL. MAY CAUSE SCRATCHES.
KEEP AWAY FROM CHILDREN AND OTHER VULNERABLE PEOPLE.
- USE ONLY FOR INTENDED PURPOSE.