The base model of the Rain Drop series sets a high standard for excellent water repellency and ease of application. Formulated with highly reactive siloxanes, it forms a powerful hydrophobic coating, lasting approx. 5 months on the body, and 2 months on glass.
Rain Drop Spray uses a self-smoothing formula to deliver exceptionally reliable application performance. Specially designed polymers allow the coating film to level itself as it is applied, easily and consistently achieving a streak-free, clear gloss finish.
Compatible with coated vehicles and all paint colours, one bottle is enough to treat approximately 12 mid-size vehicles.
Durability assessed by standard testing. Durability varies depending on environment.
| Name of product | Rain Drop Spray |
|---|---|
| JAN code | 4975759005384 |
| Content | 500ml |
| Ingredients and materials | Silicone resin, siloxanes, alcohols |
| Storage and disposal methods | After use, wipe the spray nozzle clean and turn it to OFF. Store upright in a well-ventilated place away from fire, direct sunlight, high temperatures (above 40°C), and freezing conditions. When disposing, use up the contents completely and dispose of in accordance with local regulations. |
How to use the product
1. Wash the vehicle thoroughly and rinse off all dirt, sand, and shampoo residue.
2. Shake well before use. Turn the nozzle to ON, spray directly onto the wet surface (approx. one shot per 50 cm square), and immediately spread and wipe with a clean microfiber cloth. Wring the cloth frequently while wiping to remove excess water.
If used on a dry surface, finish by wiping with a wrung-out, damp cloth.
Apply to glass before body.
For grilles, wheels, dashboards, etc., spray onto the cloth before use.
If streaks remain, rinse the cloth well, wring out tightly, and wipe again..
Allow to dry for at least 24 hours. In low temperatures (below 10℃), place the vehicle in sunlight to promote bonding.
After use, wipe the nozzle and turn to OFF. Wash the microfiber cloth with water and dry before storage. If dirty, use neutral detergent. Do not use bleach or fabric softener.
If the vehicle is professionally coated, check the warranty/guide before use.
2. Shake well before use. Turn the nozzle to ON, spray directly onto the wet surface (approx. one shot per 50 cm square), and immediately spread and wipe with a clean microfiber cloth. Wring the cloth frequently while wiping to remove excess water.
If used on a dry surface, finish by wiping with a wrung-out, damp cloth.
Apply to glass before body.
For grilles, wheels, dashboards, etc., spray onto the cloth before use.
If streaks remain, rinse the cloth well, wring out tightly, and wipe again..
Allow to dry for at least 24 hours. In low temperatures (below 10℃), place the vehicle in sunlight to promote bonding.
After use, wipe the nozzle and turn to OFF. Wash the microfiber cloth with water and dry before storage. If dirty, use neutral detergent. Do not use bleach or fabric softener.
If the vehicle is professionally coated, check the warranty/guide before use.
-
- Use only for intended purpose.
Use in a well-ventilated area.
Refer to the vehicle instruction manual before use.
Do not use in strong wind, dusty areas, or hot weather.
Do not spray upside down.
Do not leave liquid on the surface.
Do not rub excessively.
Do not use on interior glass.
Do not use on steering wheels, pedals, shift knobs, or other driving control parts.
Do not use on tyres, rubber parts, or genuine leather.
Do not spray toward the human body.
Wash hands thoroughly after use.
On body:
Test on an inconspicuous area before use on repainted or deteriorated paintwork.
Performance may vary depending on paint or coating condition.
Do not use on matte paint or matte wrap.
Surface remains water-repellent while effective.
On glass:
Warm the glass in cold conditions before use.
Remove existing coatings before use.
Do not use on specially treated mirrors or glass.
Reapply if uneven water repellency affects visibility.
Use water or water-repellent washer fluid (Glaco recommended).
Replace worn wiper blades to prevent judder.
- Use only for intended purpose.
-
- Do not inhale or drink. Harmful to the human body.
People with sensitive skin may suffer an allergic reaction. Wear protective gloves.
Keep away from fire.
Keep out of reach of children and vulnerable people.
If swallowed, do not induce vomiting. Seek medical advice immediately.
If in eyes, rinse with clean water for at least 15 minutes. If symptoms persist, consult a doctor.
If on skin, wash thoroughly with clean water. If symptoms persist, consult a doctor.
If feeling unwell, stop use immediately. If symptoms persist, consult a doctor.
- Do not inhale or drink. Harmful to the human body.