This is the evolution of Rain Drop 'Bazooka' - coating both body and glass at the same time. The newly developed Tornado Vortex Head (TV Head) increases speed and ease of application.
Just spray and wipe to activate the G-RAS shield effect, boasting a dramatic improvement over existing technology to provide 5 months of deep shine and hydrophobic protection on the body, and 3 months of rain repellence on glass.
When empty, simply remove the TV Head and replace the cartridge with the large volume refill.
| Name of product | Rain Drop Tornado Vortex 300ml |
|---|---|
| JAN code | 4975759005360 |
| Content | 300ml |
| Ingredients and materials | Siloxanes, silicone resin, alcohol |
| Storage and disposal methods | After use, wipe liquid from spray nozzle. Store in a cool, dry place away from direct sunlight, high (above 40℃) or freezing temperatures, inside vehicles, and areas where rust is likely to occur. When disposing of the product, use the entire contents, spray remaining gas away from flame outdoor area, and then dispose according to local regulations. |
How to use the product
1. Wash and rinse vehicle thoroughly before use.
2. While locked, shake the can 20 times before spraying evenly onto the wet surface, about 2 seconds per square meter. Wipe up immediately with a clean, dry microfiber cloth, refolding as necessary.
NOTE:
Apply to glass before the body.
If unevenness occurs, thoroughly wash and wring out a microfiber cloth and repeat wiping.
When using on a dry surface, wet and wring out cloth before use.
When applying to grill or wheels, spray onto cloth and wipe surface.
After application, avoid wetting for 1 hour in summer, or 24 hours in winter, to improve coating performance.
In hot conditions (above 35℃), cool can in water for a few minutes before use.
In cold conditions, warm can in tepid water before use.
2. While locked, shake the can 20 times before spraying evenly onto the wet surface, about 2 seconds per square meter. Wipe up immediately with a clean, dry microfiber cloth, refolding as necessary.
NOTE:
Apply to glass before the body.
If unevenness occurs, thoroughly wash and wring out a microfiber cloth and repeat wiping.
When using on a dry surface, wet and wring out cloth before use.
When applying to grill or wheels, spray onto cloth and wipe surface.
After application, avoid wetting for 1 hour in summer, or 24 hours in winter, to improve coating performance.
In hot conditions (above 35℃), cool can in water for a few minutes before use.
In cold conditions, warm can in tepid water before use.
-
- Use only for intended purpose.
Check the vehicle's instruction manual before use.
In winter or when the spray power is weak, soak the can in lukewarm water (35°C or less) for several minutes before use. DO NOT heat with flame, hot water, hair dryer, etc.
Use in a well-ventilated area.
Do not use in strong winds, dusty areas, or in hot weather with temperatures of 35°C or higher.
Do not leave liquid on surface for extended periods as it may cause stains and unevenness.
Do not pull or apply excessive force to the rotating tube, as it may be damaged.
Do not scrub with excessive force, as it may cause scratches. Do not use on interior glass or other parts inside the car.
Do not spray toward the human body.
Wash hands thoroughly with soap after use.
[Precautions when using on the body]
When using on a repainted car or a deteriorated body, test in an inconspicuous place before using.
Sufficient effect may not be obtained depending on the condition of the paint or coating.
Do not use on matte paint or matte wrap.
[Precautions when using on glass]
In cold conditions, work while warming the glass with the heater or defogger.
Remove other glass coatings before use.
Do not use on specially treated mirrors or glass, such as coloured, anti-glare, water repellent, hydrophilic, or ultrasonic parts.
Please be aware that if the humidity is high and there is a large temperature difference between the inside and outside of the car, wipers may cause the water-repellent coating to become uneven depending on the conditions and duration of use, making it difficult to see ahead. Re-apply if necessary.
Do not use traffic film removal washer fluid. Use only water or water-repellent washer fluid (e.g. Glaco).
If the wiper rubber has deteriorated, the wipers may judder. Replace with new wipers.
If you have a professionally coated vehicle, please check with the workshop before use.
- Use only for intended purpose.
-
- Do not inhale or drink: Harmful to the human body.
People with sensitive skin may suffer an allergic reaction. Wear protective gloves.
Do not store in direct sunlight or in a car with temperatures above 40°C. Risk of explosion.
Keep away from fire.
Keep out of reach of children and vulnerable people.
If swallowed, do not induce vomiting. Seek medical advice immediately.
If in eyes, rinse with clean water for at least 15 minutes. If symptoms persist, consult a doctor.
If on skin, wash thoroughly with clean water. If symptoms persist, consult a doctor.
If feeling unwell, stop use immediately. If symptoms persist, consult a doctor.
- Do not inhale or drink: Harmful to the human body.