Easy to apply and highly durable, this wheel paint can be applied without primer, straight over any previous paint or bare chrome.
| Name of product | Wheel Color Paint |
|---|---|
| Type | Candy Smoke Candy Blue Candy Red Candy Base Coat Silver Gold Silver Mat Black Black White Red Clear Gun Metallic |
| JAN code | 4975759075370 |
| Content | 300ml |
| Ingredients and materials | Synthetic resins (acrylic), pigments (not included in clear), nitrocellulose, organic solvents |
| Storage and disposal methods | STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING. USE/RELEASE CONTENTS COMPLETELY AND WAIT 2 HOURS BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS. |
How to use the product
1. Remove dust, oil, burring, and rust from the area to be treated. Sandpaper may be used to achieve a superior finish.
2. Shake well each time before spraying. The internal ball bearing should make a noise.
3. Spray from 15-25 cm away. Do not attempt to spray all at once; spray thinly in parallel lines, using 2-3 layers to achieve an even finish. Wait 5 minutes between each layer.
4. Leave to dry for 1 hour. Final hardening ℃curs by heating. Drive for 1 hour to harden through heating. Do not touch before hardening.
5. To prevent clogging, discharge upside-down for 2 seconds, wipe the nozzle, replace cap, and store.
2. Shake well each time before spraying. The internal ball bearing should make a noise.
3. Spray from 15-25 cm away. Do not attempt to spray all at once; spray thinly in parallel lines, using 2-3 layers to achieve an even finish. Wait 5 minutes between each layer.
4. Leave to dry for 1 hour. Final hardening ℃curs by heating. Drive for 1 hour to harden through heating. Do not touch before hardening.
5. To prevent clogging, discharge upside-down for 2 seconds, wipe the nozzle, replace cap, and store.
Product Q&A
- Q
How many wheels can I paint with one?
- Q
Can it also be used for magnesium wheels?
- Q
Can the finish with the clear paint be substituted with Body Paint Clear?
- Q
Is it okay to spray with the tyre attached?
- Q
Do I need to use "Wheel Colour W42 Clear" even after using "Wheel Colour W39 Black"?
- Q
Is it necessary to perform the base treatment with Primer-Surfacer?