1. SOFT99 TOP
  2. Product Information
  3. Repairs
  4. Paints Spray type
  5. Bumper Primer

Bumper Primer

You can treat the bumper surface before painting. It adheres firmly to the materials such as a polypropylene-bumper, and is hard to come off.

Name of product Bumper Primer
JAN code 4975759090144
Content 100ml
Ingredients and materials Synthetic resins, organic solvents
Storage and disposal methods STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING.
USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS.

How to use the product

1. Remove wax or oil from the surface with Atelier 99 Silicone Off (sold separately), and wipe it off with a cloth completely.

2. Shake the can well and spray it 25-30cm away from the surface. If you have already painted over the surface, do this after drying for 15 minutes.
    • USE ONLY FOR INTENDED PURPOSE.
      USE ONLY IN WELL-VENTILATED AREAS.
      WASH HANDS WELL WITH SOAP AFTER USE.
      DO NOT OPEN OR USE TOWARDS THE FACE, EYES OR BODY. MAKE SURE PRODUCT DOES NOT TO COME INTO CONTACT WITH CLOTHING, IF THIS OCCURS WASH IMMEDIATELY.
      DO NOT USE UPSIDE DOWN. DO NOT STORE UPSIDE DOWN. DEPENDING ON THE CONDITION OF THE CAR AND PAINT, RESULTS MAY VARY. RISK OF SCRATCHES/PEELING.

    • DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.
      DO NOT INHALE, TOUCH OR ALLOW CONTACT WITH SKIN. RISK OF POISONING, IRRITATION AND SKIN RASH.
      AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
      FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE.
      KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.

Product Q&A

Products that solve similar problems and symptoms

View category: Paints – Spray type