Only adding this additive to the in-use oil! Improves sealing effect for piston and cylinder. It contains cleaning dispersant which prevents the deposition of sludge, and special organometallic compound which keeps stable lubrication.
Moreover decreases friction, boosts engine power and torque. By repeated use, it forms molybdenum coating layer on the metal contacting surface, expect to reduce metal attack at timing of dry ignition.
*This product is exclusive for diesel engine vehicle.
| Name of product | Oil Additives D-BOOST |
|---|---|
| JAN code | 4975759102465 |
| Content | 300ml |
How to use the product
* When using, be sure to stop the engine. Clean up around oil tank inlet to avoid dust getting into engine.
1. Open oil cap, then pour this product into oil tank not to spill it out of tank.
2. Close the cap tightly. Idle the engine for about 5 min. Then make sure the oil quantity is appropriate level by checking oil gauge.
* Moderate amount is 1 can for 3- 6L engine oil.
* If the common rail system injection, check whether "fuel system" or "oil system" in advance.In case of oil system, cannot use this product.
1. Open oil cap, then pour this product into oil tank not to spill it out of tank.
2. Close the cap tightly. Idle the engine for about 5 min. Then make sure the oil quantity is appropriate level by checking oil gauge.
* Moderate amount is 1 can for 3- 6L engine oil.
* If the common rail system injection, check whether "fuel system" or "oil system" in advance.In case of oil system, cannot use this product.