The leak-stopping putty allows you to repair any heated parts such as a joint part of the engine, engine head covers, and mufflers. Not only can it resist heat up to 200℃, but also it dries quickly and has a sufficient permeability. This fills in lumps and enhances sell-up ability.
| Name of product | Muffler Joint Sealant |
|---|---|
| JAN code | 4975759091974 |
| Content | 45g |
| Ingredients and materials | Synthetic rubber, synthetic resin, organic solvent |
| Storage and disposal methods | STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING. USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS. |
How to use the product
1. Clean rusted or dirty area with Atelier 99 Water Proof Abrasive Paper and get rid of oil completely with Atelier 99 Silicone Off from the area being applied.
2. Apply this product evenly on both sides of the joint part and dry for 5-10 minutes.
3. Attach to each side and tighten up the bolts. If the fluid comes out over the joint part, wipe it off.
2. Apply this product evenly on both sides of the joint part and dry for 5-10 minutes.
3. Attach to each side and tighten up the bolts. If the fluid comes out over the joint part, wipe it off.
-
- USE ONLY FOR INTENDED PURPOSE.
USE ONLY IN WELL-VENTILATED AREAS.
WASH HANDS WELL WITH SOAP AFTER USE.
- USE ONLY FOR INTENDED PURPOSE.
-
DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.
DO NOT INHALE, TOUCH OR ALLOW CONTACT WITH SKIN. RISK OF POISONING, IRRITATION AND SKIN RASH.
AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE.
KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.