1. SOFT99 TOP
  2. Product Information
  3. Repairs
  4. Repair Tools Muffler
  5. Muffler Putty

Muffler Putty

Muffler Putty repairs holes and cracks on the car muffler. It hardens by heat. The included ceramic cloth helps you fix even big holes.

Name of product Muffler Putty
JAN code 4975759090175
Content 110g
Ingredients and materials Alkali silicate (50%), fillers, pigments
Storage and disposal methods STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING.
USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS.

How to use the product

1. Remove dirt, oil or rust from the area being repaired.

2. When you repair a crack, wet the part slightly and apply the putty with the included spatula and press.

3. When you repair a hole, cut the included ceramic cloth into piece big enough to cover over the hole and wet the part slightly. Apply the putty thinly on one side of the cloth and put it on the hole, hold, and then apply the putty over it (under 5mm thick). Afterward, let it dry for a day and allow exhaust heat to harden putty. If you boost the repaired part, use Atelier 99 Muffler Tape (sold separately) after it hardens.
    • USE ONLY FOR INTENDED PURPOSE.
      USE ONLY IN WELL-VENTILATED AREAS.
      WASH HANDS WELL WITH SOAP AFTER USE.
      DO NOT EXPOSE TO RAIN OR GET WET BEFORE CURING HAS FINISHED. DO NOT DRIVE OR RUN THE ENGINE IMMEDIATELY AFTER APPLYING THIS PRODUCT.
    • DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.
      AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
      KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.

Product Q&A

View category: Repair Tools – Muffler