How to use the product
1. Cover the electrical parts and carburetor by plastic bag or something like it, to keep it away from foam and water.
* Shake well the can before use.
2. Make sure that the engine is turned off, and fully cooled down.
3. Spray directly on dirty parts, and leave it for 5 - 10 min. Then flush with water or steam.
* For stubborn stain, rub with sponge or brush.
4. Remove plastic bag and wipe off water residue around cleaned parts, then turn on engine and keep idling to dry off engine room. Water residue causes corrosion.
* For lubrication and anti-corrosion, recommended to use "G'ZOX Multi Oil Spray" or "Multi Grease Spray" on action parts.
* Shake well the can before use.
2. Make sure that the engine is turned off, and fully cooled down.
3. Spray directly on dirty parts, and leave it for 5 - 10 min. Then flush with water or steam.
* For stubborn stain, rub with sponge or brush.
4. Remove plastic bag and wipe off water residue around cleaned parts, then turn on engine and keep idling to dry off engine room. Water residue causes corrosion.
* For lubrication and anti-corrosion, recommended to use "G'ZOX Multi Oil Spray" or "Multi Grease Spray" on action parts.