This product restores and protects transparent plastic parts that have faded or yellowed. It can be used on any transparent or translucent unpainted plastic parts, such as light lenses, window deflectors, and translucent trim. A beautiful thin film of Crystal Blue glass coating brings back the clarity of plastic parts, and counteracts yellowing due to age. Unlike one-off quick detailing agents, such as those containing silicone oil, Nano Hard Clear creates a layer of glass on the surface of the plastic, which can improve looks and add protection for over 6 months.
| Name of product | Nano Hard Clear |
|---|---|
| JAN code | 4975759031444 |
| Content | 8ml |
| Ingredients and materials | Silicon compounds, alcohols |
How to use the product
1. Remove all dirt and oil from the area to be treated. If water is used, be sure to dry completely.
2. Wearing the included gloves, shake the bottle well and add some liquid to the white surface of the included sponge. Spread thinly and evenly across the surface of the plastic.
3. After about one minute of drying, spread around again with the unused white side of the sponge, to smooth out any unevenness.
Note: Do not touch or wet for 24 hours after application. Full hardening ℃curs within 4 days. Coating must be applied with the included sponge. Do not reuse sponges.
2. Wearing the included gloves, shake the bottle well and add some liquid to the white surface of the included sponge. Spread thinly and evenly across the surface of the plastic.
3. After about one minute of drying, spread around again with the unused white side of the sponge, to smooth out any unevenness.
Note: Do not touch or wet for 24 hours after application. Full hardening ℃curs within 4 days. Coating must be applied with the included sponge. Do not reuse sponges.
-
- USE ONLY FOR INTENDED PURPOSE. FOR REPAINTED CARS, CARS WITH DETERIORATED COATINGS OR POOR BODY CONDITION, THERE IS A RISK OF DISCOLORATION. MAY BE DIFFICULT TO WIPE OFF. DUE TO OLD COATINGS, RESULTS MAY VARY. BEFORE USING, TEST ON AN INCONSPICUOUS AREA FIRST.
DO NOT USE IN HOT, RAINY OR COLD WEATHER LESS THAN 10°C DEGREES. MAY CAUSE IRREGULARITIES.
DO NOT GET WET DURING DRYING.
DO NOT USE FOR HELMET SHIELDS, MONITORS, NAVIGATION SYSTEMS, OR WHERE VISIBILITY MAY BE A PROBLEM.
TO REMOVE AFTER CURING, PLEASE USE 99 WORKSHOP PLASTIC CLEANER. SOLD SEPARATELY.
KEEP TIGHTLY SEALED. STORE IN A DRY PLACE OUT OF SUNLIGHT, BELOW 40℃. STORE AWAY FROM FREEZING CONDITIONS.
USE SPONGE INCLUDED.
- USE ONLY FOR INTENDED PURPOSE. FOR REPAINTED CARS, CARS WITH DETERIORATED COATINGS OR POOR BODY CONDITION, THERE IS A RISK OF DISCOLORATION. MAY BE DIFFICULT TO WIPE OFF. DUE TO OLD COATINGS, RESULTS MAY VARY. BEFORE USING, TEST ON AN INCONSPICUOUS AREA FIRST.
-
- DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.
AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE.
KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.
- DO NOT EAT OR DRINK. HARMFUL IF SWALLOWED OR INHALED.